fbpx

Mitsubishi Ductless Heating and Cooling Systems and Products

Mitsubishi Electric is a world leader in ductless heating and cooling technology, offering some of the most advanced and energy-efficient heat pumps available on the market. These heat pumps are incredibly versatile and can provide both heating and cooling for your home even in extreme temperatures. They can be used as a primary heating and cooling system, or they can be used to supplement an existing system.

Below, explore the features and benefits of Mitsubishi Electric brand heat pumps and how New England Ductless can help you maximize your home comfort while reducing your energy expenses and carbon emissions.

Mitsubishi Electric Heat Pump Features

High SEER Ratings

Mitsubishi heat pumps are extremely efficient, with some models boasting SEER ratings of up to 34.5. SEER ratings are a measure of how energy efficient a particular model of air conditioner is. To compare, the average standard split HVAC system has a SEER rating of around 25, and the lowest residential AC SEER rating is 14.

The higher the SEER rating, the better the AC is at rationing energy. The lower the SEER rating, the more power it uses to achieve the same indoor temperatures. SEER ratings are important to consider when purchasing an air conditioner, as they can save you money on your energy bills in the long run. 

3D i-See Sensor®

Mitsubishi Electric’s 3D i-See Sensor® is a cutting-edge feature that allows the heat pump to visualize temperature in three dimensions. The application continuously runs a thermal scan of the desired area, which is then split into more than 750 three-dimensional zones.

The data collected can tell the system where people in a room are located and how hot or cold they are, along with other key metrics. Then, the system can make automatic adjustments to temperature, fan speed, etc. This helps the heat pump to more accurately target areas that need heating or cooling, resulting in greater efficiency and comfort.

Dual Barrier Coating

The health of your unit’s coils is essential to its longevity, but this is also one area particularly prone to problems like rust and corrosion. Mitsubishi Electric’s unique hydrophobic Dual Barrier Coating protects these coils from corrosion, while also repelling dust, dirt, and water. This helps to keep the coils clean and operating at peak efficiency in between maintenance visits.

Zoned Comfort Solutions™

Mitsubishi Electric’s Zoned Comfort Solutions™ allow you to divide your home into separate zones, each with its own temperature setting. For example, if you like your bedroom cooler than another family member in your household, you can set each unit to a different temperature.

Or, you can program the zone that covers your home office to reach your desired temperature in the morning while your bedroom temperature is adjusted to save money while you’re not there. This lets you customize your comfort level, while also saving energy by only heating or cooling the areas that you are using.

Hyper-Heating INVERTER (H2i) ®

The Hyper-Heating INVERTER (H2i) ® system provides powerful heating even when outdoor temperatures are as low as -13°F. The mechanism works by triggering the compressor motor to provide a quick blast of heat when the temperature lowers past a certain point.

As the motor increases to top speed, the additional heat generated is pushed back through the blower, which quickly boosts the system’s heat output at rock-bottom temps. This feature ensures that your home stays comfortable, no matter how cold it gets outside.

Hot-Start

The Hot-Start feature eliminates one of the most annoying problems associated with forced air heaters – the immediate shot of cold air that comes through the vents until the system warms up. Hot-Start technology prevents the unit from blowing cold air when first turned on by only engaging the fan system once the unit has reached the desired temperature. This allows for immediate comfort when you need it most.

Kumo Cloud™

Mitsubishi Electric’s Kumo Cloud™ is a feature that allows homeowners to control their heat pump systems remotely via a smartphone, tablet or computer. With Kumo Cloud™, you can adjust settings, monitor energy usage and even receive alerts if there is a problem with your system. This feature is especially useful for people who are away from home for extended periods of time, as it gives them peace of mind knowing that their home is being monitored and cared for.

Variable-Speed Blowers

Mitsubishi Electric heat pumps are equipped with variable-speed blowers, which means that the system can automatically adjust the speed of the blower to meet the heating or cooling needs of the home. This results in more efficient operation and helps to reduce energy costs.

Is a Mitsubishi Electric Ductless Mini-Split Right For You?

At New England Ductless, we can help you determine if a Mitsubishi Electric model heat pump is the best option to suit your individual heating and cooling needs. Contact us today for more information by calling (781) 995-2665.